Upgrading Your DignityNet Webcasting System to the TribuCast® Remote Attendance System™

The following is a step-by-step guide on how to upgrade your existing DignityNet webcasting system to the TribuCast® Remote Attendance System™. If you have any questions or issues, please contact TribuCast® at (800) 782-0104. TribuCast® Advisors are available to answer questions, assist with technical issues and monitor your tribucasts for video and audio quality.

Para empezar, descargue OBS Studio en el PC que utiliza normalmente para la transmisión por Internet. Es gratuito y se puede encontrar AQUÍ: (//obsproject.com/download)

1. Optimize for streaming when prompted and accept the default Video Settings by clicking “Next” (NOTE: If this is not your first time installing OBS Studio at this location and you are configuring OBS Studio on an additional PC or User Account using Exported Profile and Scene configurations you can click Cancel at this point then follow the Import portion of the TribuCast OBS Studio Export/Import Configuration Instructions found under NOTES at the bottom of this page.)
2. When prompted for Stream information choose “Custom” from the drop-down menu and in the server field enter rtmp://bintu-stream.nanocosmos.de:1935/rec [NOTE: some networks will require you to use 80 instead of 1935].
3. The TribuCast® Stream Security Code you get for each service will be entered into the “Stream Key” field for each service (You can contact TribuCast for a temporary code for setup-testing purposes).
4. The system will run a bandwidth test.  Click Yes and once completed, click Apply Settings
5. Optimize OBS Studio to broadcast using TribuCast®
   1. Haga clic en Settings in the bottom-right menu
   2. Haga clic en Output and change the “Output Mode” to “Advanced”
   3. Haga clic en Rescale Output and set to “852×480”
   4. Set “Rate Control” to “VBR” and “Bitrate” to 1500
   5. Deje todos los demás ajustes como están y haga clic en Aplicar
6. Haga clic en el signo "+"en Fuentes para añadir su(s) cámara(s) existente(s)
   1. Haga clic en Video Capture Device
   2. Haga clic en Create New y OK (it should automatically find your existing cameras if they were previously configured properly). Click OK again
   3. If your camera isn’t found using this method, it may be possible to use NDI or your camera’s RTSP URL. To find your camera’s RTSP URL simply google “[your camera name & model] RTSP URL”
   4. The common RTSP URL for OneRoom’s Axis cameras is rtsp://<ip address of camera>/axis-media/media.amp
   5. The RTSP URL for Huddlecam’s newest Simple Track Lite camera is rtsp://<ip address of camera>:554/main.h264 (though you should try NDI first).  To use NDI, make sure NDI is enabled on your camera then click the “+” under Sources and choose the NDI source option.  If configured properly the NDI camera will be visible when you click on the down arrow next to Source name.  Choose the camera and click “OK”.
7. You will now see what your camera sees displayed in a box outlined in red in the upper left corner of a larger black box. You can rescale and position your image by “right clicking” on the image with your mouse and selecting “Transform” and then rescaling/resizing the image to fit the broadcast window
8. Next, plug your audio source into the mic input port on your PC (if you are using an IP camera it is preferable to plug the audio source directly into the back of the camera)
9. Haga clic en Comenzar la transmisión to start your service and Stop Streaming to stop it
10. También encontrará que OBS Studio le permitirá incluir vídeos y presentaciones en su emisión

NOTES: 

If you wish to install OBS Studio on multiple PCs and/or multiple user accounts on the same PC using the same settings, use the Profile Export/Import and Scene Collection Export/Import functions to save time:

TribuCast OBS Studio Export/Import Configuration Instructions

Use these instructions for Exporting OBS Studio Profile and Scene configurations for use on additional PCs and with additional User Accounts on existing PCs.

EXPORT

After confirming OBS Studio is correctly configured on the PC and User Account you are working from:

1. click Profile in the top menu, note that “Untitled” is checked and rename it TribuCast Profile Settings
2. Click “Export” which will create and save a folder named TribuCast Profile Settings in a location you specify. Choose a folder location on a USB drive or network drive accessible by the next pc you wish to configure and click “Select Folder”
3. Under the Scenes menu in the bottom left corner of OBS “right click” on the word “Scene” and rename it “TribuCast Scene Settings”
4. Make sure the sources you want to transfer to the next PC are accurately represented under Sources in the menu to the right of Scenes
5. Click “Scene Collection” on the menu at the top of the screen and confirm TribuCast Scene Settings is checked then click Export and export a file named TribuCastSceneSettings.json to the same folder location you saved the TribuCast Profile Settings folder.

IMPORT

Go to the pc you wish to configure using the settings you’ve just Exported and saved and install/open OBS Studio. Click Cancel when asked if you are optimizing for streaming. Do not worry about configuring any specific settings, streaming or camera sources. This process will automatically import the settings from the previous pc.

1. Click “Profile” on the OBS Studio top menu and select Import.
2. Find the USB drive or network drive location where you saved the TribuCast Profile Settings folder and select it then click “Select Folder”. This will import the profile settings from the previous pc in to the one you are now working on.
3. Go back into the Profile menu and select TribuCast Profile Settings to activate it
4. Click “Scene Collection” on the OBS Studio top menu and select Import
5. By clicking the three dots to the right of the “Collection Path” field, find the USB drive or network location where you saved the TribuCastSceneSettings.json file, highlight it and click “Open” then click “Import”
6. Go back into the Scene Collection menu and make sure the TribuCast Scene Settings option is checked.
7. You should now see all your cameras and your instance of OBS Studio should be configured.

NOTE: If you are using Overlays or accessing additional media assets such as videos or music, they will either need to be stored on a common network path that each user and pc can access, or they will need to be added to each User Account and PC manually.